Product ID:MOLD WIZ F-57 AEROSOL MOLD RELEASE AGENT
MSDS Date:11/15/1985
FSC:7850
NIIN:00N046872
MSDS Number: BSJYT

AXEL PLASTICS RESEARCH LABS INC

58-20 BROADWAY
WOODSIDE, NY 11377-0855
US

Emergency Phone: 718-672-8300

Info Phone: 718-672-8300

Cage: 51994

AXEL PLASTICS RESEARCH LABORATORIES INC

855 WOODSIDE, NY 11377-0855 NY

Telephone: 718-672-8300

Cage: 51994

(2-BUTANONE; (METHYL ETHYL KETONE)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <2%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ACETONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <4%

OSHA PEL 750 PPM;1000 STEL

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHANE, 1,1,1-TRICHLORO-; (1,1,1-TRICHLOROETHANE)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: <4.5%

OSHA PEL 350 PPM;450 PPM STEL

ACGIH TLV: 350 PPM;450 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SOLVENT NAPHTHA; (PETROLEUM NAPHTHA SOLVENT)

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: <2%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

ETHANE, 1,1,2-TRICHLORO-1,2,2-TRIFLUORO-;

CAS: 76-13-1

RTECS: KJ4000000

Fraction By Weight: 52.5%

OSHA PEL 1000PPM;1250 STEL

ACGIH TLV: 1000PPM;1250 STEL

METHANE, DICHLORODIFLUORO-; (DICHLORODIFLUOROMETHANE)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: 35%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: LT-HEAD, SHORT OF BRTH.
INGEST: UNLIKELY AS AN AEROSOL PROD. SKIN: MAY CAUSE DRYNESS. EYES:
MAY CAUSE TEMPORARY IRRIT/CONJ. CHLOROFLUOROCARBON MATLS HAVE PRDCD
SENSIT OF MYOCARDIUM TO EP INEPHRINE IN LAB ANIMALS & COULD HAVE
SIMILAR EFT IN HUMANS. ADRENOMIMETICS (E.G., EPINEPHRINE) MAY (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: BE CONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES IN HUMANS ACUTELY OR CHRONICALLY EXPOSED TO
CFC'S .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE
MOUTH-TO-MOUTH RESUSCITATION. IF BREATHING DIFFICULT, GIVE OXYGEN.
CALL PHYSICIAN. INGEST: (NOT LIKELY AS AN AEROSOL PRODUCT). CALL MD
IMMED . S KIN: WASH AREA WITH DETERGENT AND WATER. EYES: IMMED
FLUSH WITH LIBERAL AMOUNT OF WATER FOR AT LEAST 15 MINUTES.

Flash Point:NON FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMPRESSED GAS IN AEROSOL MAY EXPLODE
UNDER FIRE CONDITIONS. THERMAL DECOMP PROD MAY INCL HCL, CHLORIDES,
FLUORIDES AND PHOSGENE .

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. CNTN SPILL;
IF CONTAINER IS DAMAGED TRANSFER TO CLOSED LINED METAL, GLASS/
PLASTIC CONTAINER. USE ABSORBANT MATERIAL TO COLLECT AND CONTAIN
FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE WHERE TEMPERATURE EXCEEDS
130F/ 55C. STORE AWAY FROM OPEN FLAME, HIGH HEAT SOURCES AND
WELDING ARCS.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES/HOT SURF. HEAT &/OR UV RADIA
MAY CAUSE FORM OF HCL, CHLORIDES, FLUORIDES AND PHOSGENE .

Respiratory Protection:USE IN WELL VENTILATED AREA. RESPIRATORY MASK IS
NOT REQUIRED, BUT IF USED, SHOULD BE TYPE FOR ORGANIC VAPORS. USE
NIOSH/ MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST: PREFERABLE. MECH: ACCEPTABLE.
Protective Gloves:IMPERVIOUS RUBBER OR PLASTIC.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:AS REQUIRED BY YOUR COMPANY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:120F,49C
Vapor Pres:300
Vapor Density:2.9
Spec Gravity:1.4
Evaporation Rate & Reference:RAPID
Solubility in Water:SLIGHTLY
Appearance and Odor:MILDLY WHITE, CHARACTERISTIC ODOR

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:OPEN FLAMES & WELDING ARCS. DO NOT STORE
WHERE TEMPERATURE EXCEEDS 130F/55C.
Hazardous Decomposition Products:HIGH TEMPERATURES OR OPEN FLAME MAY
CAUSE DECOMP & GIVE OFF TOXIC GASES. HCL, CHLORIDES, FLUORIDES &
PHOSGENE .

Waste Disposal Methods:AXEL PLASTICS SUGGESTS THAT ALL LOC, STATE AND
FEDERAL REGULATIONS CONCERNING HEALTH AND POLLUTION BE REVIEWED TO
DETERMINE APPROVED DISPOSAL PROCEDURES. CONTACT AXEL PLASTICS IF
THERE ARE ANY DISPOSA L QUESTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.